Benefits
Analyte sensitivity enhanced up to 10 times or more, depending on liquid sample uptake rate
Low-volume sample uptake rates of 50, 100, or 200 microliters/min, preserving valuable sample
C-Flow PFA nebulizer with integrated autosampler probe for use with Teledyne CETAC ASX-112FR MicroAutosampler
Heated PFA spray chamber for higher sample transport efficiency
Both PFA nebulizer and PFA spray chamber are behind a secured door to alleviate electrostatic effects
Inert fluoropolymer membrane for resistance to acids (including HF) and low oxide and hydride levels
Built-in mass flow controllers (MFCs) for precise setting of Ar sweep gas and N2 addition gas
Convenient computer software control of spray chamber temperature, membrane oven temperature and both Ar sweep gas and N2 addition gas allows remote tuning if the Aridus3 is placed in a clean enclosure
New Flow Saver software application allows the user to turn off Ar and N2 gas flows after completion of an overnight run, saving valuable gases
New removable membrane heater block for ease of cleaning or replacement
| Specification Title | Specification Details |
|---|---|
| Nebulizer | C-Flow PFA; 50, 100, or 200 µL/min |
| Spray Chamber | PFA with pumped drain |
| Temperature | 110°C |
| Desolvating Membrane | Fluoropolymer |
| Ar Sweep Gas | 0.00 to 12.00 L/min |
| N2 Addition Gas | 0.0 to 50.0 mL/min |
| Input Pressure | Ar: 70 to 100 psi (4.8 to 6.9 bar) |
| Temperature | 140°C |
| Voltage | 120 VAC +/- 10%, 50/60 Hz, 6A 220 VAC +/- 10%, 50/60 Hz, 3A |
| Computer Requirements | Windows 7 / Windows 10 (32 bit or 64 bit) .Net 4.6 (included on CD or Windows 10) Minimum 2GB RAM One available serial or USB port |
| Dimensions (W x H x D) | 33.7 cm x 19.2 cm x 52.0 cm |
| Weight | 11.8 kg (26 lbs) |
| Optional | QuickWash3 Rapid Washout Accessory |
Product Brochure